Hard drives
A hard drive stores data on spinning platters read by moving heads. That means it can fail in three different ways: the files get lost, the electronics die, or the moving parts break.
- Files deleted, or the drive was formatted by mistake
- The files are usually still on the drive until something new is saved over them. Stop using the drive right away.
- The drive shows up but asks to be formatted, or shows the wrong size
- The file system or the drive’s own firmware is damaged. The data is often intact underneath.
- The drive is very slow, freezes, or drops out while copying
- Usually bad sectors. The drive is wearing out, and every attempt to read it can make it worse. It should be imaged carefully, not copied file by file.
- No spin, no lights, or a burnt smell
- An electrical failure on the drive’s circuit board, often after a power surge or the wrong power adapter.
- Clicking, grinding or beeping, or the drive was dropped
- A mechanical failure inside the drive. Unplug it and leave it off. Running it can scrape the platters and destroy the data for good.